Vacancies

📢 THÔNG BÁO TUYỂN DỤNG

Nhóm Nghiên cứu Điện hóa Ứng dụng, Khoa Khoa học và Kỹ thuật Vật liệu – Trường Đại học Phenikaa, trân trọng thông báo tuyển dụng các vị trí sau:

1. KỸ THUẬT VIÊN PHÒNG THÍ NGHIỆM (01 vị trí)

Yêu cầu:

• Trình độ: Thạc sĩ
  
  

• Chuyên môn: Vật liệu, Kỹ thuật Hóa học, Điện hóa hoặc các ngành liên quan
  
  

• Mức lương: 12 – 15 triệu đồng/tháng
  
  

Công việc chính:

• Phụ trách giảng dạy thực hành thí nghiệm
  
  

• Quản lý trang thiết bị và vận hành phòng thí nghiệm của Khoa
  
  

2. GIẢNG VIÊN NGÀNH KHOA HỌC VẬT LIỆU (01 vị trí)

Yêu cầu:

• Trình độ: Tiến sĩ
  
  

• Chuyên môn: Khoa học Vật liệu, Vật liệu điện tử, Điện hóa
  
  

Công việc chính:

• Giảng dạy các học phần chuyên ngành Vật liệu bán dẫn
  
  

• Tham gia xây dựng, chỉnh sửa chương trình đào tạo
  
  

• Sinh hoạt chuyên môn và nghiên cứu khoa học
  
  

Mức lương: Cạnh tranh – thỏa thuận theo năng lực

📧 Ứng viên quan tâm vui lòng gửi CV về địa chỉ email:
hinh.dinhthi@phenikaa-uni.edu.vn

📞 Hoặc liên hệ trực tiếp:
TS. Đinh Thị Hinh – SĐT: 0354212986

02 Research Members, 01 PhD and 02 Master student positions are available at AEC LAB (Updated on March 3rd, 2025)

Project 1: Thermodynamics and kinetic mechanisms of metal nucleation (M = Pt, Pd, Ag, Ni, Co, Cu, Cr, Zn, Sn...) on the electrode glassy carbon from deep eutectic solvent (DES): A comparative study between macroelectrochemistry and microchemistry using Scanning Electrochemical Microscope, SCEM.

Project 2: Synthesis and characterization of binary (Fe-Ni, Fe-Co, Pt – Co, Pt – Fe, Pd – Co…) and ternary (Fe-Ni-Co, Pt – Co-Ni, Pt -Pd-Ni, Pd – CoCr...) alloys from DES as catalysts for fuel cells. The fabrication process as well as the catalytic behavior of these materials will be studied under static and forced convection conditions using a rotating electrode system to simulate the working conditions of the catalytic materials during the fuel cell. 

Project 3: Optimizing the effectiveness of the catalyst to improve the performance of hydrogen fuel cells using a scanning electrochemical microscope system to obtain images, distribution maps, locations, intensity and density of reactions, catalytic reaction on proton exchange membrane. Establish a process for manufacturing catalysts at laboratory scale and bench scale.

Project 4: Recovery and circulation of precious metals such as Pt, Ni, Co from post-use MAE electrode membrane assemblies and wasted batteries. 

The main goal of this project is to develop controllable processes for the fabrication of high-efficiency and cost-effective catalysts at a large scale for fuel cells by electrodeposition method, exploring the possibility of reducing the Pt content in the catalysts by creating alloys of Pt and a less expensive metal, such as Ni, Co and Cu.

As a PhD student, you will be responsible for designing and performing experiments on the synthesis and characterizations of the catalysts using the facilities in-house at Phenikaa University and our collaborators such as XRD, SEM, HR-TEM, UV-VIS, FTIR, TGA… under the supervision of Assoc. Prof. Dr. Tu Le Manh. You will be also in charge of investigating the electrochemical properties and evaluating the performance of the synthesized catalysts as electrode materials for fuel cells. For this part of the project, you will be working under the supervision of Assoc. Prof. Dr. Manh Tu Le of the Faculty of Materials Science and Engineering, Phenikaa University. 

YOUR PROFILE

We are looking for a highly motivated candidate with excellent academic skills. A Master's degree in Materials Science, Physics, Chemistry, Physical Chemistry, or Chemical Engineering is required. Having on experiences in electrodeposition and materials characterization (especially XRD, SEM, HR-TEM, XPS), electrochemistry, fabrication and characterization of fuel cells and other energy conversion and storage devices are highly desirable. Good written and oral communication skills in English (IELTS 5.0, TOEFL 65 or TOIC 650) are required.

For Research Member, the candidate must hold a PhD degree in Materials Science, Materials chemistry or related fields. Candidates with experience in fuel cells or battery recycling are highly recommended.  

OUR OFFERS

• A fulltime position for three years for PhD students and two years for master students, with a qualifier in the first year.

• A monthly gross salary of 8.000.000 VND in the first year,  which may increase to 12.000.000 VND in the third year depending on your performance.

• Fully covered tuition fees and research costs.

• A dynamic ecosystem with an enthusiastic team in a stimulating scientific environment.

• For Research Member, the salary is competative, according to your performance and university regulations. 

INFORMATION AND APPLICATION

Please, send your application to Assoc. Prof. Dr. Tu LeManh (tu.lemanh@phenikaa-uni.edu.vn) from March 1st, 2024. Applications should include a specific motivation letter and a detailed CV. The project is ready to start.

For more information, please refer to AEC LAB website: https://aeclab.phenikaa-uni.edu.vn/home.